Central feeding system, to achieve continuous unmanned continuous forming operations. It can be changed according to the needs of raw materials, to achieve automation of the coloring process. As a result, factories that have used a central feed system understand that it can fully control the regeneration of the sprue and use of the sprue to control all the supply equipment and prevent clogging in the hopper. In simple terms, it is designed for the production of plastic products for the injection molding shop. Heng Wing technicians above also share the working principle of the central feed system. This time to introduce the benefits of using the central feed system.
The benefits of using a central feed system are:
1, As the injection molding workshop technology continues to improve, the required material quality requirements are also getting higher and higher, the application of the central feeding system can greatly improve product quality, greatly improve the production efficiency of enterprises, reduce the non-performing rate and business Cost of production.
2, the central feed system piping does not occupy the ground space, take the tube and placed beautiful, saving a lot of effective space for the enterprise, but also can effectively improve the environment of the production workshop.
3, many workshops need to use a combination of multi-color materials, materials, then we must use the central feed system can be adjusted according to the needs of different raw materials, to achieve the whole plant unmanned operation of feeding, save a lot of manpower for the enterprise, so Can save a lot of trouble for the business refueling.
4, the traditional feeding equipment, the feeding efficiency is slow, can not meet the use of materials used in the workshop production requirements, and the central feeding system uses microcomputer centralized automatic control, to achieve a continuous feed of pellets 24 hours. Can guarantee the diversification of the main requirements, and safe and reliable work, feeding high efficiency.
5, the use of the central feeding system, while avoiding the resurgence of raw materials, but also ensure that the performance of raw materials added to the injection molding machine performance. Under the action of vacuum negative pressure, the raw dust in the raw material is filtered out through the dust filtration system, which helps to improve the quality of the molded product.
The benefits of using the central feed system are introduced here, so we can see that the central feed system can also be used by different users, different plant characteristics, different raw material requirements, can be based on the actual Need to design a reasonable solution.
